Keep reading
You are hereHow Emission Height Shifts a Pulsar Profile
Radio Beams from a Spinning Neutron Star · Reading path
Emission above the surface shifts when each part of the pulse arrives. To turn that shift into a height, we need a trustworthy marker for where the magnetic pole passed nearest to Earth.
Imagine a point forced to rotate at the star’s spin rate. Far enough from the spin axis, its implied transverse speed would reach the speed of light. That distance is the light-cylinder radius. For a period of 0.10677 seconds the radius is about 5,094 kilometers.
The radio emission can arise well within that radius. At low altitude, the effects of the emitter’s motion and the photon’s propagation time can be treated to first order in the emission radius divided by the light-cylinder radius.
In the first-order model, the inflection in the position angle comes later than the center of a symmetric intensity profile. Compare the phases in radians. A separation of 8 degrees becomes about 0.140 radians and gives a conditional emission radius of roughly 178 kilometers for the example period.
A lopsided beam can shift the intensity centroid even at fixed radius. The altitude inferred from that centroid moves by the same conversion factor. If the two poles yield different answers, a single symmetric emission cone may be a poor explanation for both.
Let F be the zero-altitude angular curve and let the magnetic meridian phase be free. In the simple shifted-angle model, the meridian and the height occur in one sum. A larger radius with an earlier meridian leaves the angle curve unchanged.
A fit that bridges both poles can constrain the inclination. To learn an absolute altitude with this approach, add a phase reference or say which symmetry assumption supplies one.
You keep the fitted position-angle curve fixed but move the assumed intensity centroid 2 degrees later. What happens to the radius for a period of 0.10677 seconds?
The lag shrinks by 2 degrees. Using the light-cylinder radius of 5,094 kilometers, the conditional radius decreases by about 44.5 kilometers.
Sections 3 and 4 fit the position-angle swing and discuss the radio beam geometry of PSR J0908−4913.
Sections 2 and 3 allow different emission heights at the two poles and compare beam widths.
The low-altitude, first-order calculation relates the angle swing’s delay to the emission radius.
You are hereHow Emission Height Shifts a Pulsar Profile
Radio Beams from a Spinning Neutron Star · Reading path