Skip to main content
Sandbox Physics
Radio Beams from a Spinning Neutron Star

Reading a Gamma-Ray Pulsar Atlas

A gamma-ray peak can collect photons emitted far apart along the magnetosphere. In Watters and colleagues’ arXiv:0812.3931v1, figures 2, 6 and 7 show how this changes the way we compare radio and gamma-ray pulses.

Different emission sites can share one arrival phase

In figure 2, start with the axes. Each point in the atlas fixes the magnetic tilt and viewing tilt. The left panels record the number of predicted peaks. The middle panels record peak separations. The colors come from prescribed emission models.

Photons from two altitudes can be emitted at different orientations as the star turns. Motion of the emitting plasma changes the direction in which they leave, and distance changes how long they take to reach us. Where these shifts compress many emission sites into a narrow arrival interval, the profile forms a caustic peak.

Check the two measurements in figure 6

One coordinate gives the separation between the two gamma-ray peaks. The other gives the lag from the radio phase marker to the first gamma-ray peak. Both use fractions of one turn. The simulated radio-loud points assume radio emission centered on the magnetic axis.

Several observed pulsars have a larger lag than that assumption predicts for either of the two outer-magnetosphere prescriptions shown. Look at figure 7 next. It changes the assumed radio emission site on the leading side at a specified altitude. The resulting change in lag shows how a radio phase assumption can move a point across the diagram.

Open a real phase profile

Open the Fermi Third Pulsar Catalog entry for J0908−4913 and inspect Pulse Profile. Record the reference radio pulse, which gamma-ray feature comes next, and the number of rotations shown. Keep the catalogue timing ephemeris with that comparison.

The MeerKAT file in the preceding chapter has its own folded phase zero. Establish a common ephemeris and reference convention before placing those points on the Fermi axis. This reading exercise compares the catalogue presentation with the atlas assumptions. It leaves a new photon fit and a new caustic simulation for their own analysis.

Open the pulsar beam Lab

Sources

  1. Kramer and Johnston (2008), High-precision geometry of a double-pole pulsar

    Sections 3 and 4 fit the position-angle swing and discuss the radio beam geometry of PSR J0908−4913.

  2. Watters et al. (2009), An atlas for interpreting gamma-ray pulsar light curves

    Figures 2–4 plot light-curve characteristics over viewing and magnetic inclination in prescribed emission geometries.

  3. Fermi LAT Third Pulsar Catalog, PSR J0908−4913

    Inspection of this catalogue entry starts with the radio and gamma-ray phase panels and the timing ephemeris.

Keep reading

What this page links to directly

See this series on the content map →

Radio Beams from a Spinning Neutron Star · Reading path

From two flashes to a polarimetry fit

  1. ArticleHow One Pulsar Makes Two Radio Peaks
  2. ArticleSolving for the Two Edges of a Pulsar Beam
  3. ArticleWhy a Pulsar’s Polarization Angle Turns
  4. ArticleHow Emission Height Shifts a Pulsar Profile
  5. ArticleFit the Polarization of PSR J0908−4913
  6. You are hereReading a Gamma-Ray Pulsar Atlas
Something broken, confusing, or missing on this page?Tell us
What kind of feedback?

Sent with this page’s address, its Lab ID, the site language and your device type. Please leave out personal details. Feedback is kept for up to 12 months.Privacy policy