How a clump of plasma delays and bends a radio burst
Sandbox Physics ·
Free electrons make radio waves travel slower than light by an amount that grows as the square of the wavelength. A column of electrons therefore delays a burst, and a column that changes across the sky also bends it. For a Gaussian clump, one dimensionless number, the lens strength α, collects the electron column, the clump size, the distance and the frequency. When α is larger than about 2.24, one burst can reach us along three paths.
In a cold, unmagnetized plasma of electron density ne, waves below the plasma frequency νp cannot propagate. Above it the refractive index is
n=1−ν2νp2≈1−2ν2νp2,νp2=πnerec2,
where re=2.818×10−15m is the classical electron radius. For interstellar gas νp is of order a kilohertz, so at radio frequencies νp≪ν and the first-order form is enough.
A burst travels at the group velocity vg=cn. Integrating 1/vg−1/c≈νp2/(2cν2) along the path gives the extra arrival time
with the dispersion measure DM=∫nedl in pccm−3. The coefficient follows from SI constants: our independent check gives 4.1488 ms. Cordes and Chatterjee's review quotes 4.15 ms as the leading term of the arrival time, with smaller terms in ν−3 and ν−4 that we neglect. Fast Radio Bursts: An Extragalactic Enigma, Eq. 1
Phase runs ahead, so rays bend away
The phase velocity c/n is larger than c. Over the same path the phase therefore runs ahead of vacuum by
Δϕ=c2πν∫(n−1)dl=−λreNe,
where Ne is the electron column in m−2. A wavefront is a surface of constant phase. Where the column is larger the phase is further ahead, so the wavefront tilts and the ray turns toward smaller columns. The deflection angle is
θ(x)=2πλdxdΔϕ=−2πλ2redxdNe.
A clump denser than its surroundings has dNe/dx<0 on its far side, so rays are pushed outward: an overdense plasma clump is a diverging lens. Because θ∝λ2, low frequencies bend more.
A Gaussian clump and its lens equation
Follow Clegg, Fey and Lazio and take a one-dimensional clump with a Gaussian column, Ne(x)=Nℓe−x2/a2, of peak dispersion measure DMℓ and width a. The Gaussian plasma lens in astrophysics Its deflection is
θ(x)=πa2λ2reNℓxe−x2/a2.
Put the lens a distance D in front of the source, with the observer much farther away. A ray that leaves the source at transverse position xs, crosses the lens plane at x and then heads for the observer must have been deflected by θ(x)=(xs−x)/D. Measure lengths in units of a: u=x/a for the crossing point and u′=xs/a for the source offset from the lens centre. Then
Each solution u is a separate path, an image of the source. The left side is a straight line bent by a bump. When the bump is weak, every u′ has one solution. When it is strong, the curve turns back on itself and some offsets have three. The next chapter shows the turn-back needs α>e3/2/2≈2.24.
Two delays for each path
Each path is late for two reasons. It is longer than the straight line, by (x−xs)2/2D in the small-angle limit, and it crosses part of the electron column. In units of a,
These are Eqs. 12 to 14 of the 2017 paper. A useful identity ties the scales together: tg0α=tDM0. For a=1AU and D=1kpc, tg0=1.21μs.
Worked example. Take the Lab default, DMℓ=0.6pccm−3, a=30AU, D=1kpc, at 600MHz. Then α=3430×0.6/(0.6×30)2=6.35, tDM0=4.149×0.6/0.36=6.91ms and tg0=1.21μs×900=1.09ms. Their ratio is 6.35, as the identity says. A source exactly behind the core, u′=0, has one image at u=0: it pays the full dispersive delay of 6.91 ms and no geometric delay.
Lab tasks
In the plasma-lens echo Lab, choose the preset that puts the source behind the lens. Predict the delay of the single copy from tDM0, then read it from the data row.
Halve the lens column with the first slider. Predict how α and tDM0 change, then check the secondary readouts.
Move the observing frequency from 600 to 400 MHz. Explain from the formula for α why the scene changes.
Exercises
Compute tDM0 for DMℓ=0.6pccm−3 at 400 MHz and at 800 MHz.
Show that tg0α=tDM0 from the definitions.
A clump has DMℓ=2pccm−3, a=10AU and sits 0.1kpc from the source. Find α, tDM0 and tg0 at 1 GHz.
Where across the Gaussian clump is the deflection largest, and how large is it for the Lab default?
AnswersShow the answer
tDM0=4.149×0.6/νGHz2 gives 15.6ms at 400 MHz and 3.89ms at 800 MHz. Halving the frequency multiplies the delay by four.
tg0α=2cDa2⋅πν2a2c2reDMℓD=2πν2creDMℓ=tDM0, using λ=c/ν.
α=3430×2×0.1/(1×10)2=6.86, tDM0=4.149×2=8.30ms and tg0=1.21μs×100/0.1=1.21ms. The lens is strong enough to make three images.
θ∝ue−u2 peaks where its derivative (1−2u2)e−u2 vanishes, at u=1/2. There θmax=α(a/D)e−1/2/2=0.429αa/D. With α=6.35, a=30AU and 1kpc=2.06×108AU, θmax=4.0×10−7rad, about 0.08 arcseconds.