Skip to main content
Sandbox Physics
Fast radio bursts: repeats, echoes and plasma lenses

Search one CHIME burst for a lens echo and test R3's repeats

Sandbox Physics ·

This guide fits a frozen CHIME dynamic spectrum of FRB 20180725A with one burst and with one burst plus a lensed copy. It finds no copy: the best copy improves χ2\chi^2 by only 0.63, and pure noise does at least that well 67 percent of the time. Injections show what the fit can and cannot see. It then measures the repeat statistics of FRB 20180916B from the second CHIME catalogue and works out what lens would be needed to fake them. Every number on this page comes from one script that runs in under a minute.

Read the Gaussian lens chapter and the timing-statistics chapter first. Both inputs are observed CHIME data; the noise trials and injections are synthetic.

Get the files

Put these eight files in one empty folder:

Then run:

python3 -m pip install numpy scipy
python3 reproduce.py

It exits with status 0 when every value matches the saved outputs to a relative 5×10−35\times10^{-3} or an absolute 0.05. The burst fit uses Nelder-Mead, which stops at a tolerance, so the last digits can differ between platforms. We ran it with Python 3.9.6, numpy 2.0.2 and scipy 1.13.1. The data come from the CHIME/FRB Collaboration: the First CHIME/FRB Catalog (DOI 10.11570/21.0007) for the cutout and the Second CHIME/FRB Catalog (DOI 10.11570/25.0066) for the rows. Cite them with any copy; no broader licence is asserted.

Units and conventions

Table 5.1 Units and conventions.
QuantityConvention
Time in the fitms; delays quoted at 600 MHz
Dispersiont=4.148808 ms DM/νGHz2t=4.148808\,\mathrm{ms}\,\mathrm{DM}/\nu_{\rm GHz}^2, DM in pc cm−3\mathrm{pc\,cm^{-3}}
Scatteringone-sided exponential, τ(ν)=τ600 (ν/600 MHz)−4\tau(\nu)=\tau_{600}\,(\nu/600\,\mathrm{MHz})^{-4}
Catalogue timemjd_400, topocentric UTC referenced to 400.1953125 MHz
Selectionexcluded_flag = 0, one event per catalogue name
Lens modelCordes et al. 2017 Eqs. 3, 14, 25, 26; T4=1T_4=1; lens width a=3rFa=3r_{\rm F}

Step 1: fit one burst

The cutout has 64 channels from 400 to 800 MHz and 38 time bins of 0.983 ms. Ten channels are fully masked, leaving 54. The burst model is a Gaussian of width σ\sigma convolved with a one-sided exponential tail, shifted in each channel by a residual dispersion δDM\delta\mathrm{DM}. Each channel gets its own amplitude and baseline, solved linearly; noise per channel comes from the off-pulse bins 0 to 7 and 22 to 37.

Table 5.2 One-burst fit (model H0).
ParameterValue
Arrival at 600 MHz12.61 ms after window start
Width σ\sigma0.601 ms
Scattering τ600\tau_{600}1.147 ms
Residual DM0.101 pc cm−3\mathrm{pc\,cm^{-3}}
χ2\chi^2 / degrees of freedom2478.8 / 1940 (reduced 1.28)

A reduced χ2\chi^2 of 1.28 means the model misses some structure. Keep that in mind when reading the significance below.

Step 2: add a lensed copy

A plasma-lens echo is the same burst, weaker, later and, when the dispersive term dominates, with a delay that grows as ν−2\nu^{-2}. The constrained model adds one copy with a single amplitude ratio rr and delay shared by every channel:

Ic(t)=Ac[sc(t)+r sc(t−Δt (νc/600 MHz)−2)]+Bc.I_c(t)=A_c\left[s_c(t)+r\,s_c\left(t-\Delta t\,(\nu_c/600\,\mathrm{MHz})^{-2}\right)\right]+B_c .

A second version, achromatic, uses the same delay in every channel. The scan covers delays from 0.5 to 9.5 ms (chromatic; longer copies leave the window at 400 MHz) or 0.5 to 20 ms (achromatic), and ratios from 0.05 to 1.5. The statistic is the largest drop Δχ2\Delta\chi^2 over the grid. Its null distribution comes from 300 synthetic data sets: the best H0 model plus white noise with each channel's off-pulse scatter, seed 20261114.

Table 5.3 Echo search on FRB 20180725A.
Copymax Δχ2\Delta\chi^2null 95th / 99th percentilefalse alarm probability
chromatic0.635.55 / 7.740.67
achromatic1.337.51 / 11.450.81

No copy is detected. The best grid point sits at the smallest ratio, 0.05, which is what an absent signal looks like. Rescaling the noise so the H0 fit has reduced χ2=1\chi^2=1 gives false alarm probabilities of 0.68 and 0.86.

An earlier version gave each channel its own copy amplitude. It returned Δχ2=104\Delta\chi^2=104 for an achromatic copy, an apparent detection. The 54 extra free amplitudes, fitted to a model that already misses structure, made that number meaningless. Sharing one ratio across the band is the physical constraint that turns the fit into a test.

Step 3: what the fit can see

Inject a chromatic copy into the best H0 model, add noise, refit H0 and rescan.

Table 5.4 Injection tests.
Injected delay, ratioΔχ2\Delta\chi^2Recovered delay, ratioRefit τ600\tau_{600}
4.0 ms, 0.5023.84.3 ms, 0.153.36 ms
4.0 ms, 0.155.974.8 ms, 0.052.01 ms
0.5 ms, 0.506.328.3 ms, 0.051.32 ms

The first row is the main failure case. The copy is clearly detected at nearly the right delay, but the refit scattering tail triples and swallows most of it, so the ratio comes back three times too small. A scattering tail and a delayed copy are partly degenerate at 1 ms resolution. The second row is marginal, near the 95th percentile of the null. The third shows that a copy closer than one time bin is lost: the scan finds noise at a wrong delay.

Step 4: repeat statistics of FRB 20180916B

repeat_statistics.py reads the 142 catalogue rows, keeps 131 taken during nominal operation and merges sub-bursts into 104 events.

Table 5.5 Repeat statistics, Catalogue 2.
QuantityValue
Events, span104, MJD 58410.34 to 60125.65
Gaps36.3 s to 112.7 d, median 14.9 d
Gaps under 1 h / 1 h to 1 d / over 1 d22 / 21 / 60
Sub-burst offsets in one event0.10 to 68 ms (27 offsets)
Distance from transit, 95th percentile0.42 h; none beyond 3 h
Weibull shape, all gapsk=0.42k=0.42
Window-only Poisson trialskk from 0.60 to 0.84 (central 90 percent of 200)
Fraction in the published window at 16.35 d0.91
Phase uncertainty at the last event0.99 cycles
Rayleigh peak, 15.5 to 17.5 d16.33 d

The fold is a consistency check with topocentric 400 MHz times, not a new period measurement. The published period used barycentric times at infinite frequency. Periodic activity from a fast radio burst source

Step 5: what a lens would need

For each delay, the script finds the gain-one image at u2=1/2u^2=1/2, where the delay is close to tDM0 α/2et_{\rm DM0}\,\alpha/2e. It fixes the lens width at a=3rFa=3r_{\rm F}, solves for the column and computes free-free absorption with Eq. 26 of Cordes and colleagues. Lensing of fast radio bursts by plasma structures in host galaxies

Table 5.6 Optical depth at 600 MHz of a lens that makes a gain-one echo.
Echo delayτff\tau_{\rm ff}, lens 1 pc from sourceτff\tau_{\rm ff}, lens 1 kpc from sourceα\alpha
36.3 s (shortest gap)0.370.0124.1×1054.1\times10^5
1 day87127.52.0×1072.0\times10^7
14.9 d (median gap)130004127.7×1077.7\times10^7
16.35 d (period)142004508.0×1078.0\times10^7

Only the shortest gap could escape absorption, and it would need an extreme lens with the source 1.7×1051.7\times10^5 lens radii off axis. None of this changes the basic count: one lens gives at most three copies with fixed delays.

Failure cases and limits

  • The null uses white noise. The reduced χ2\chi^2 of 1.28 shows correlated residuals, so the false alarm probabilities are approximate.
  • One copy, one ratio for all channels. A real lens gain changes with frequency; a copy that is bright in only part of the band would be missed.
  • Delays below one 0.98 ms bin are not resolved, and a scattering tail can hide a copy a few ms late.
  • The Weibull fit treats all gaps as one sample. The window-only trials are an idealized exposure; CHIME's real exposure varies from day to day.
  • The lens requirement assumes a single Gaussian lens at 10410^4 K and a=3rFa=3r_{\rm F}. A hotter lens absorbs less: τff∝T4−1.32\tau_{\rm ff}\propto T_4^{-1.32}.

Lab tasks

Set the burst width in the plasma-lens echo Lab to about 0.6 ms, the width fitted here. Find a lens setting whose second copy is 4 ms late, and compare the time profile with the injection in Table 5.4.

The CHIME paper on the 16-day cycle is read figure by figure in the next guide: how to read the CHIME paper on the 16-day FRB cycle.

Sources

  1. Periodic activity from a fast radio burst source
  2. Lensing of fast radio bursts by plasma structures in host galaxies

Keep reading

What this page links to directly

See this series on the content map →

Fast radio bursts: repeats, echoes and plasma lenses · Reading path

From one burst to source-or-path tests

  1. ArticleIs a repeating radio flash the source repeating, or its path?
  2. ArticleHow a clump of plasma delays and bends a radio burst
  3. ArticleImages, gains and delays of a Gaussian plasma lens
  4. ArticleTelling source repetition from path effects with timing statistics
  5. You are hereSearch one CHIME burst for a lens echo and test R3's repeats
  6. ArticleHow to read the CHIME paper on the 16-day FRB cycle
Something broken, confusing, or missing on this page?Tell us
What kind of feedback?

Sent with this page’s address, its Lab ID, the site language and your device type. Please leave out personal details. Feedback is kept for up to 12 months.Privacy policy