Skip to main content
Sandbox Physics

Tidal Disruption and Stellar Fallback

Why can a torn star brighten long after its closest approach? Tidal forces give the stellar debris different orbital energies. Bound debris must complete long, unequal orbits before returning, and its orbital energy must then become heat and escaping light. Both the return journey and the escape of radiation can delay the brightening.

Drag the incoming orbit past a black hole. Follow weighted stellar debris along its orbits, then compare its return rate with a separate model for escaping light.

Interactive modelTidal Disruption and Stellar Fallback
First debris return33.3 d33.3\,\mathrm d
Bound debris mass0.497 M⊙0.497\,M_\odot
Peak fallback rate1.81 M⊙ yr−11.81\,M_\odot\,\mathrm{yr}^{-1}
Illustrative light peak299 d299\,\mathrm d
Time after first periapsist=20 dt=20\,\mathrm d
Blue: bound debrisCoral: escaping debrisGold glow: illustrative lightTrails: past paths
One star spreads across orbital energies
ϵ/Δϵ\epsilon/\Delta\epsilonΔM [M⊙]\Delta M\ [M_\odot]
The return and the release of light
Simulated fallbackIllustrative lightDashed: ideal uniform sphere
t [d]t\ [\mathrm d]M˙/M˙max⁡, L/Lmax⁡\dot M/\dot M_{\max},\ L/L_{\max}

The energy bins and fallback use the same saved debris. Each curve in the right panel is divided by its own peak; their heights do not compare physical units.

Offline hydrodynamics and observed light
Published STARS hydrodynamic fallback
t [d]t\ [\mathrm d]M˙ [M⊙ yr−1]\dot M\ [M_\odot\,\mathrm{yr}^{-1}]

Offline three-dimensional hydrodynamics: a one-solar-mass zero-age main-sequence star, radius 0.9012 solar radii, a one-million-solar-mass black hole, and penetration factor 2. Both axes are logarithmic. Every fourth original row and the last row are shown, with straight segments between them.

This is a fixed reference with different stellar structure and encounter depth from the browser impulse model. The companion tutorial also freezes an actual ASASSN-14li band light curve and reproduces the comparisons from downloaded files.

Download the original hydrodynamic tableRead the course and reproduction guide

The return journey sets the first clock

BackgroundA star passing near a black hole feels a stronger pull on its near side than on its far side. Once that difference overwhelms the star’s own gravity, the debris acquires a spread of orbital energies. Some escapes; some remains bound and returns.

Why it mattersA telescope measures escaping photons. Before using their changing brightness to infer a black hole, we need to separate the debris return time from the time required to dissipate energy and release light.

Focus question
Does a deeper passage necessarily make the fallback clock run faster?
One-sentence intuition
In this tidal-radius impulse approximation, the energy spread sets return times, while the penetration factor mainly changes orbital geometry. Hydrodynamic disruption can change that simple picture.

Core mathematical model

Tidal radius and closest approach

rt=R∗(M∙M∗)1/3rp=rtβ\begin{gathered}r_{\rm t}=R_*\left(\frac{M_\bullet}{M_*}\right)^{1/3}\\r_{\rm p}=\frac{r_{\rm t}}{\beta}\end{gathered}

The tidal radius compares differential black-hole gravity with stellar self-gravity. The penetration factor divides this radius by the orbital periapsis. Stellar mass and radius are fixed to solar values here.

Energy determines the orbital period

ϵ=v22−GM∙r<0P=2πGM∙(−2ϵ)3/2\begin{gathered}\epsilon=\frac{v^2}{2}-\frac{GM_\bullet}{r}<0\\P=\frac{2\pi GM_\bullet}{(-2\epsilon)^{3/2}}\end{gathered}

Bound debris has negative specific orbital energy. Weakly bound debris makes a large orbit and takes much longer to return. The model saves positions, velocities and mass weights before calculating return times.

A flat energy distribution gives the familiar late tail

dMdϵ≃constantM˙=dMdϵ∣dϵdt∣∝t−5/3\begin{gathered}\frac{\mathrm dM}{\mathrm d\epsilon}\simeq\mathrm{constant}\\\dot M=\frac{\mathrm dM}{\mathrm d\epsilon}\left|\frac{\mathrm d\epsilon}{\mathrm dt}\right|\propto t^{-5/3}\end{gathered}

The exponent follows from the Kepler period and an approximately flat energy spectrum near zero energy. It describes a late-time limit. The rising part of a disruption depends on the actual stellar structure and disruption dynamics.

Returning mass and escaping light have separate clocks

H=min⁡(ηM˙c2,LEdd)dEraddt=H−L,L=Eradtdiff\begin{gathered}H=\min(\eta\dot M c^2,L_{\rm Edd})\\\frac{\mathrm dE_{\rm rad}}{\mathrm dt}=H-L,\quad L=\frac{E_{\rm rad}}{t_{\rm diff}}\end{gathered}

An exponential reservoir illustrates how energy storage can broaden and delay radiation. The heating supplied to this reservoir is capped at the Eddington luminosity before diffusion. Efficiency and diffusion time are illustrative inputs; the scene does not calculate disk formation or radiative transfer.

Common difficulties

A returning stream still has orbital motion

Typical misconceptionThe fallback rate directly tells us the observed brightness in every band.

Better mental modelReturning debris must dissipate energy, and radiation must escape through surrounding gas. A band also samples only part of the spectrum. The tutorial compares an actual band light curve separately.

The power law has conditions

Typical misconceptionEvery tidal disruption follows the same power law from its first day.

Better mental modelThe late tail assumes a nearly flat energy distribution. The early rise and peak depend on stellar structure, stripping and heating; published hydrodynamic references help show where the impulse model differs.

Run the experiment

  1. 01

    Follow bound and escaping debris

    Watch the default orbit. Blue samples are bound; coral samples escape. Scrub the orbital time to inspect the same saved debris at another instant.

    What to observe: Bound debris turns around at different distances. Its first-return times populate the fallback curve below the scene.
  2. 02

    Change the encounter

    Drag the gold periapsis handle, then change black-hole mass. Compare how the orbit and first-return scale respond.

    What to observe: Changing penetration bends the encounter geometry. Changing mass changes the tidal and orbital scales as well. The fixed tidal-radius freeze prescription controls the energy spread.
  3. 03

    Give the light time to escape

    Compare prompt escape and delayed escape presets, then move the diffusion-time slider while watching the lower curves.

    What to observe: The debris orbits and fallback can stay the same while the radiative peak broadens or shifts. The luminosity curve belongs to the separate reservoir model.
  4. 04

    Save an orbit record

    Pause and save the debris. Use the method guide to rebuild a return histogram and compare it with the frozen reference products.

    What to observe: The download retains the model inputs, particle states, weights and plotted curves. The offline tutorial separately identifies hydrodynamic simulations and observed light.

Related experiments and articles

What this page links to directly

See every article series on the content map →

Follow stellar debris back to a black hole · Reading path

Follow stellar debris back to a black hole

Articles on this path that use this experiment, followed by the other experiments they suggest.

  1. ArticleWhy a shredded star can take weeks to brighten
  2. ArticleGive the debris its orbital energies
  3. LabTidal Deformation, Locking & BreakupFirst watch a deformable moon
  4. ArticleTurn orbital energies into a return-rate curve
  5. ArticleLet returning gas become escaping light
  6. LabBlack Hole Light LabFollow light from a supplied disk
  7. ArticleReplay debris orbits beside a real X-ray light curve
  8. ArticleRead the evidence for colliding tidal streams
Something broken, confusing, or missing on this page?Tell us
What kind of feedback?

Sent with this page’s address, its Lab ID, the site language and your device type. Please leave out personal details. Feedback is kept for up to 12 months.Privacy policy