---
title: "阻尼音调与克尔黑洞的频谱"
description: "先定质量单位，把铃宕写成阻尼正弦之和，从克尔频率表读出频率和衰减时间，再看泛音为什么衰减最快。"
canonical_url: "https://sandboxphysics.com/zh/stories/black-hole-ringdown/damped-tones-and-the-kerr-spectrum/"
language: "zh-CN"
page_type: "story"
alternate_languages:
  en: "https://sandboxphysics.com/stories/black-hole-ringdown/damped-tones-and-the-kerr-spectrum/"
last_modified: "2026-11-14"
---

[黑洞铃宕与无毛检验](https://sandboxphysics.com/zh/stories/black-hole-ringdown/)

# 阻尼音调与克尔黑洞的频谱

Sandbox Physics · 2026-11-14

铃宕是几个阻尼正弦的叠加。对克尔黑洞，每个频率和衰减时间都等于一个固定的数除以黑洞质量，这个数只由自转决定。这一章先定单位，写出信号，再从克尔模式表里读频率，最后说明第一泛音为什么比基模衰减快约三倍。

[打开黑洞铃宕Lab](https://sandboxphysics.com/zh/labs/black-hole-ringdown-spectroscopy/)

如果这个概念对你还陌生，先读[刚并合的黑洞，为什么会像钟一样鸣响](https://sandboxphysics.com/zh/stories/black-hole-ringdown/why-a-black-hole-rings/)。会用指数、正弦和 $a+ib$ 形式的复数，就够读这一章。

## 用黑洞质量当时间单位

令引力常数和光速都等于一，$G=c=1$。质量为 $M$ 的黑洞就有了自己的时间单位 $GM/c^3$。一倍太阳质量对应 $4.925\,\mu\mathrm s$，所以对任意质量

$$
\frac{GM}{c^3}=4.925\,\mu\mathrm s\times\frac{M}{\mathrm{M}_\odot}.
$$

写成“$10M$”的时间，就是十个这样的单位。$M\omega$ 这样的无量纲乘积对所有质量都成立，换成秒时才用到具体质量。

**表 2.1** 两个残骸黑洞的时间单位。

| 质量 | $GM/c^3$ | $10\,GM/c^3$ |
| --- | --- | --- |
| $68.5\,\mathrm{M}_\odot$ | $0.3374\,\mathrm{ms}$ | $3.374\,\mathrm{ms}$ |
| $40\,\mathrm{M}_\odot$ | $0.1970\,\mathrm{ms}$ | $1.970\,\mathrm{ms}$ |

这里的质量都是在探测器处量到的。远处天体发出的波被宇宙膨胀拉长，用频率推出的质量是源头质量乘以 $1+z$。GW150914的事件目录给出源头残骸质量 $63.1\,\mathrm{M}_\odot$、红移 $0.09$，换到探测器处是 $68.8\,\mathrm{M}_\odot$。[GWOSC, GW150914 event record, GWTC-1 v3](https://gwosc.org/eventapi/json/GWTC-1-confident/GW150914/v3)

## 铃宕是阻尼正弦之和

并合之后，信号里最强的是 $l=m=2$ 这种角向花样。它的每个模式用泛音序号 $n$ 标记，以频率 $f_n$ 振荡，以衰减时间 $\tau_n$ 变弱：

$$
h(t)=\sum_{n}A_n\,e^{-t/\tau_n}\cos\!\left(2\pi f_n t-\phi_n\right),\qquad t\ge t_0 .
$$

振幅 $A_n$ 和相位 $\phi_n$ 取决于并合怎样发生，频率和衰减时间则不然。把后两者装进一个复频率最方便。取时间因子 $e^{-i\omega t}$，衰减的模式虚部为负：

$$
\omega_n=2\pi f_n-\frac{i}{\tau_n}.
$$

乘上质量就成了纯数，于是

$$
f_n=\frac{\mathrm{Re}(M\omega_n)}{2\pi\,GM/c^3},\qquad \tau_n=\frac{GM/c^3}{\lvert\mathrm{Im}(M\omega_n)\rvert}.
$$

品质因数 $Q_n=\pi f_n\tau_n=\mathrm{Re}(M\omega_n)/(2\lvert\mathrm{Im}(M\omega_n)\rvert)$ 衡量一个模式能响多久：一个衰减时间里它振 $Q_n/\pi$ 圈。它只取决于自转。[Berti, Cardoso and Starinets, Quasinormal modes of black holes and black branes, arXiv:0905.2975v2](https://arxiv.org/abs/0905.2975v2)

## 读克尔模式表

广义相对论规定 $M\omega_n$ 只是自转 $\chi=a/M$ 的函数。这些数来自求解Teukolsky波动方程：在视界处波只能往里掉，在无穷远处只能往外走。我们用Leaver连分数法求解，把结果存在步长 $0.01$ 的自转网格上。[Berti, Cardoso and Starinets, §4.6](https://arxiv.org/abs/0905.2975v2) 我们的数值与CENTRA铃宕数据页公开的表格相差不到十亿分之一，做法见[复算教程](https://sandboxphysics.com/zh/stories/black-hole-ringdown/recomputing-ringdown-tones-and-a-public-event/)。

**表 2.2** 冻结表中的克尔引力波模式，$M\omega=\mathrm{Re}+i\,\mathrm{Im}$。

| 自转 $\chi$ | $220$ | $221$ | $330$ |
| --- | --- | --- | --- |
| $0$ | $0.37367-0.08896i$ | $0.34671-0.27391i$ | $0.59944-0.09270i$ |
| $0.5$ | $0.46412-0.08564i$ | $0.44741-0.26022i$ | $0.74092-0.08868i$ |
| $0.69$ | $0.52822-0.08116i$ | $0.51648-0.24541i$ | $0.83721-0.08329i$ |
| $0.9$ | $0.67161-0.06487i$ | $0.66766-0.19525i$ | $1.04464-0.06546i$ |

标记 $lmn$ 依次是角向花样和泛音序号：$220$ 是基模，$221$ 是它的第一泛音，$330$ 是下一种角向花样的基模。

**例题1。** 取 $M=68.5\,\mathrm{M}_\odot$、$\chi=0.69$，时间单位是 $0.3374\,\mathrm{ms}$。基模

$$
f_{220}=\frac{0.52822}{2\pi\times0.3374\,\mathrm{ms}}=249\,\mathrm{Hz},\qquad \tau_{220}=\frac{0.3374\,\mathrm{ms}}{0.08116}=4.16\,\mathrm{ms}.
$$

LIGO和Virgo根据GW150914整段信号预言 $f_{220}=251\pm8\,\mathrm{Hz}$、$\tau_{220}=4.0\pm0.3\,\mathrm{ms}$（90%）。[Abbott et al., Tests of general relativity with GW150914, arXiv:1602.03841v3](https://arxiv.org/abs/1602.03841v3) 我们只取一组质量和自转，他们用整个后验分布，两者在给出的范围内相符。

## 泛音为什么先消失

看 $221$ 那一列。实部和基模接近，音高差不多；虚部却大了三倍。同一个例子里，$f_{221}=244\,\mathrm{Hz}$，$\tau_{221}=1.37\,\mathrm{ms}$。

两个振幅之比每过一个时间单位就乘上同一个因子：

$$
\frac{A_1(t)}{A_0(t)}=\frac{A_1}{A_0}\,\exp\!\left[-\left(\lvert\mathrm{Im}\,M\omega_{221}\rvert-\lvert\mathrm{Im}\,M\omega_{220}\rvert\right)\frac{t}{M}\right].
$$

**例题2。** $\chi=0.69$ 时方括号里是 $0.24541-0.08116=0.16425$，所以每过 $1M$，泛音的相对大小就只剩 $e^{-0.16425}=0.849$。拟合一个类似GW150914的数值模拟，峰值处 $A_1/A_0$ 接近 $4$。[Giesler, Isi, Scheel and Teukolsky, Black hole ringdown: the importance of overtones, Table I](https://arxiv.org/abs/1903.08284v2) 过了 $10M$，这里约 $3.4\,\mathrm{ms}$，比值降到 $4\times e^{-1.6425}=0.77$：泛音已经比基模弱，但远没有弱到可以忽略。

## 从一个音调反推质量和自转

$Q$ 只取决于自转，所以一个测到的音调可以分两步反推：先由 $Q$ 得 $\chi$，再由频率得 $M$。Berti、Cardoso和Will为此拟合了简单公式，适用于 $0\le\chi\le0.99$：

$$
M\omega_{lmn}=f_1+f_2(1-\chi)^{f_3},\qquad Q_{lmn}=q_1+q_2(1-\chi)^{q_3}.
$$

$220$ 的系数是 $f_1=1.5251$、$f_2=-1.1568$、$f_3=0.1292$、$q_1=0.7$、$q_2=1.4187$、$q_3=-0.499$，文中给出的最大误差是频率 $1.85$%、$Q$ $0.88$%。[Berti, Cardoso and Will, On gravitational-wave spectroscopy of massive black holes with the space interferometer LISA, Table VIII](https://arxiv.org/abs/gr-qc/0512160v2)

**例题3。** 由我们的表，$\chi=0.69$ 时 $Q_{220}=0.52822/(2\times0.08116)=3.254$。把拟合式倒过来，$(1-\chi)^{-0.499}=(3.254-0.7)/1.4187=1.800$，于是 $1-\chi=0.308$，$\chi=0.692$。把这个自转代回频率公式，再用 $f_{220}=249\,\mathrm{Hz}$，得到 $M=68.9\,\mathrm{M}_\odot$。拟合式还原的自转偏差 $0.3$%，质量偏差 $0.7$%。

## Lab练习

1. 用表2.2预言默认残骸的 $f_{220}$ 和 $\tau_{220}$，再打开Lab里的附加读数核对。
2. 把质量手柄从68.5拖到约40倍太阳质量。看画面上的波纹变密、视界变小，两者都按质量之比变化。
3. 保持质量不变，把自转调到0.9。先用表2.2算出基模能多响多久，再看波纹在消失前传得更远。

## 习题与讲解

1. 求 $M=40\,\mathrm{M}_\odot$、$\chi=0.9$ 时的 $f_{220}$ 和 $\tau_{220}$。
2. 史瓦西黑洞的 $\chi=0$。它的基模在一个衰减时间里振几整圈？
3. $\chi=0.69$ 时，泛音与基模之比在 $5M$ 内缩小多少倍？
4. 只测到一个频率而不知道衰减时间，为什么定不出质量和自转两个数？

答案

1. 时间单位是 $0.1970\,\mathrm{ms}$。于是 $f_{220}=0.67161/(2\pi\times0.1970\,\mathrm{ms})=543\,\mathrm{Hz}$，$\tau_{220}=0.1970/0.06487\,\mathrm{ms}=3.04\,\mathrm{ms}$。
2. 圈数是 $f\tau=Q/\pi$。$Q_{220}=0.37367/(2\times0.08896)=2.10$，所以只有 $0.67$ 圈。史瓦西黑洞的铃宕差不多只摆一下。
3. 因子是 $e^{-5\times0.16425}=e^{-0.821}=0.44$。从 $4$ 开始，到 $5M$ 时比值约为 $1.8$。
4. 频率等于 $\mathrm{Re}(M\omega)(\chi)/M$。更重、转得更快的黑洞，可以和更轻、转得更慢的黑洞给出同一个频率，一个数只能定出 $(M,\chi)$ 的一整条曲线。衰减时间通过 $Q$ 在这条曲线上选出一点。

下一章把这些阻尼正弦拟合到带噪声的记录上，看看漏掉泛音会出什么问题：[为什么从峰值拟合铃宕需要泛音](https://sandboxphysics.com/zh/stories/black-hole-ringdown/fitting-a-ringdown-from-the-peak/)。

## 在Lab里试一试

先预言68.5倍太阳质量、自转0.69时的基模频率，再打开附加读数核对。 [打开黑洞铃宕Lab](https://sandboxphysics.com/zh/labs/black-hole-ringdown-spectroscopy/)

## 来源

1. [GWOSC, GW150914 event record, GWTC-1 v3](https://gwosc.org/eventapi/json/GWTC-1-confident/GW150914/v3)
2. [Berti, Cardoso and Starinets, Quasinormal modes of black holes and black branes, arXiv:0905.2975v2](https://arxiv.org/abs/0905.2975v2)
3. [Abbott et al., Tests of general relativity with GW150914, arXiv:1602.03841v3](https://arxiv.org/abs/1602.03841v3)
4. [Giesler, Isi, Scheel and Teukolsky, Black hole ringdown: the importance of overtones, Table I](https://arxiv.org/abs/1903.08284v2)
5. [Berti, Cardoso and Will, On gravitational-wave spectroscopy of massive black holes with the space interferometer LISA, Table VIII](https://arxiv.org/abs/gr-qc/0512160v2)

## 继续阅读

黑洞铃宕与无毛检验 · 阅读路径

### 从黑洞的余响到无毛检验

1. [文章 **刚并合的黑洞，为什么会像钟一样鸣响？**](https://sandboxphysics.com/zh/stories/black-hole-ringdown/why-a-black-hole-rings/)
2. [当前页面 **阻尼音调与克尔黑洞的频谱**](https://sandboxphysics.com/zh/stories/black-hole-ringdown/damped-tones-and-the-kerr-spectrum/)
3. [文章 **为什么从峰值拟合铃宕需要泛音**](https://sandboxphysics.com/zh/stories/black-hole-ringdown/fitting-a-ringdown-from-the-peak/)
4. [文章 **从两个音调到无毛检验**](https://sandboxphysics.com/zh/stories/black-hole-ringdown/from-two-tones-to-a-no-hair-test/)
5. [文章 **复算铃宕音调、一段合成信号和GW150914的一小段数据**](https://sandboxphysics.com/zh/stories/black-hole-ringdown/recomputing-ringdown-tones-and-a-public-event/)
6. [文章 **怎样读2019年GW150914泛音论文及其后的争论**](https://sandboxphysics.com/zh/stories/black-hole-ringdown/reading-the-gw150914-overtone-paper/)
