---
title: "Tidal Disruption and Stellar Fallback Interactive Lab | Sandbox Physics"
description: "Why can a torn star brighten long after its closest approach? Tidal forces give the stellar debris different orbital energies."
canonical_url: "https://sandboxphysics.com/labs/tidal-disruption-fallback/"
language: "en"
page_type: "lab"
alternate_languages:
  zh-CN: "https://sandboxphysics.com/zh/labs/tidal-disruption-fallback/"
last_modified: "2026-11-16"
---

# Tidal Disruption and Stellar Fallback

**Why can a torn star brighten long after its closest approach?** Tidal forces give the stellar debris different orbital energies. Bound debris must complete long, unequal orbits before returning, and its orbital energy must then become heat and escaping light. Both the return journey and the escape of radiation can delay the brightening.

Drag the incoming orbit past a black hole. Follow weighted stellar debris along its orbits, then compare its return rate with a separate model for escaping light.

> Interactive simulation: open this page in a web browser to change the parameters and run the model.

Model assumptions

The interactive scene follows a Newtonian, pressure-free impulse model after disruption. A solar-mass, solar-radius uniform-density star freezes at the tidal radius. Its weighted debris samples follow Kepler orbits; their first return supplies the fallback curve. The penetration factor changes angular momentum and orbital geometry, with no imposed squared enhancement of the energy spread. The black-hole mass and penetration ranges keep the periapsis outside the strong-field region of this example. Stellar self-gravity, pressure, stream collisions, general relativity, circularization and a physical accretion disk are omitted. Small out-of-plane stellar offsets are projected onto the reference orbital plane. The radial coordinate uses a hyperbolic arcsine to keep the tidal radius and distant debris in one view, with no uniform distance scale; particle sizes and the black hole are enlarged. Returned samples leave the ballistic scene at their first return. The separate exponential diffusion model applies an Eddington cap to the heating before it enters the radiative reservoir; the escaping luminosity is a bolometric illustration, not a measured band flux. Published hydrodynamic fallback references and actual ASASSN-14li measurements are separate offline products in the tutorial.

Time after first periapsis $t=20\,\mathrm d$ Orbital time

Blue: bound debris Coral: escaping debris Gold glow: illustrative light Trails: past paths

One star spreads across orbital energies

$\epsilon/\Delta\epsilon$ $\Delta M\ [M_\odot]$

The return and the release of light

Simulated fallback Illustrative light Dashed: ideal uniform sphere

$t\ [\mathrm d]$ $\dot M/\dot M_{\max},\ L/L_{\max}$

The energy bins and fallback use the same saved debris. Each curve in the right panel is divided by its own peak; their heights do not compare physical units.

Offline hydrodynamics and observed light

Published STARS hydrodynamic fallback

$t\ [\mathrm d]$ $\dot M\ [M_\odot\,\mathrm{yr}^{-1}]$

Offline three-dimensional hydrodynamics: a one-solar-mass zero-age main-sequence star, radius 0.9012 solar radii, a one-million-solar-mass black hole, and penetration factor 2. Both axes are logarithmic. Every fourth original row and the last row are shown, with straight segments between them.

This is a fixed reference with different stellar structure and encounter depth from the browser impulse model. The companion tutorial also freezes an actual ASASSN-14li band light curve and reproduces the comparisons from downloaded files.

[Download the original hydrodynamic table](https://sandboxphysics.com/astronomy/ac53/hydrodynamics/beta-2.000.dat) [Read the course and reproduction guide](https://sandboxphysics.com/stories/tidal-disruption-fallback/)

## The return journey sets the first clock

**Background** A star passing near a black hole feels a stronger pull on its near side than on its far side. Once that difference overwhelms the star’s own gravity, the debris acquires a spread of orbital energies. Some escapes; some remains bound and returns.

**Why it matters** A telescope measures escaping photons. Before using their changing brightness to infer a black hole, we need to separate the debris return time from the time required to dissipate energy and release light.

- **Focus question**: Does a deeper passage necessarily make the fallback clock run faster?
- **One-sentence intuition**: In this tidal-radius impulse approximation, the energy spread sets return times, while the penetration factor mainly changes orbital geometry. Hydrodynamic disruption can change that simple picture.

### Core mathematical model

#### Tidal radius and closest approach

$$
\begin{gathered}r_{\rm t}=R_*\left(\frac{M_\bullet}{M_*}\right)^{1/3}\\r_{\rm p}=\frac{r_{\rm t}}{\beta}\end{gathered}
$$

The tidal radius compares differential black-hole gravity with stellar self-gravity. The penetration factor divides this radius by the orbital periapsis. Stellar mass and radius are fixed to solar values here.

#### Energy determines the orbital period

$$
\begin{gathered}\epsilon=\frac{v^2}{2}-\frac{GM_\bullet}{r}<0\\P=\frac{2\pi GM_\bullet}{(-2\epsilon)^{3/2}}\end{gathered}
$$

Bound debris has negative specific orbital energy. Weakly bound debris makes a large orbit and takes much longer to return. The model saves positions, velocities and mass weights before calculating return times.

#### A flat energy distribution gives the familiar late tail

$$
\begin{gathered}\frac{\mathrm dM}{\mathrm d\epsilon}\simeq\mathrm{constant}\\\dot M=\frac{\mathrm dM}{\mathrm d\epsilon}\left|\frac{\mathrm d\epsilon}{\mathrm dt}\right|\propto t^{-5/3}\end{gathered}
$$

The exponent follows from the Kepler period and an approximately flat energy spectrum near zero energy. It describes a late-time limit. The rising part of a disruption depends on the actual stellar structure and disruption dynamics.

#### Returning mass and escaping light have separate clocks

$$
\begin{gathered}H=\min(\eta\dot M c^2,L_{\rm Edd})\\\frac{\mathrm dE_{\rm rad}}{\mathrm dt}=H-L,\quad L=\frac{E_{\rm rad}}{t_{\rm diff}}\end{gathered}
$$

An exponential reservoir illustrates how energy storage can broaden and delay radiation. The heating supplied to this reservoir is capped at the Eddington luminosity before diffusion. Efficiency and diffusion time are illustrative inputs; the scene does not calculate disk formation or radiative transfer.

### Common difficulties

#### A returning stream still has orbital motion

**Typical misconception** The fallback rate directly tells us the observed brightness in every band.

**Better mental model** Returning debris must dissipate energy, and radiation must escape through surrounding gas. A band also samples only part of the spectrum. The tutorial compares an actual band light curve separately.

#### The power law has conditions

**Typical misconception** Every tidal disruption follows the same power law from its first day.

**Better mental model** The late tail assumes a nearly flat energy distribution. The early rise and peak depend on stellar structure, stripping and heating; published hydrodynamic references help show where the impulse model differs.

### Run the experiment

1. 01

   #### Follow bound and escaping debris

   Watch the default orbit. Blue samples are bound; coral samples escape. Scrub the orbital time to inspect the same saved debris at another instant.

   **What to observe:** Bound debris turns around at different distances. Its first-return times populate the fallback curve below the scene.

2. 02

   #### Change the encounter

   Drag the gold periapsis handle, then change black-hole mass. Compare how the orbit and first-return scale respond.

   **What to observe:** Changing penetration bends the encounter geometry. Changing mass changes the tidal and orbital scales as well. The fixed tidal-radius freeze prescription controls the energy spread.

3. 03

   #### Give the light time to escape

   Compare prompt escape and delayed escape presets, then move the diffusion-time slider while watching the lower curves.

   **What to observe:** The debris orbits and fallback can stay the same while the radiative peak broadens or shifts. The luminosity curve belongs to the separate reservoir model.

4. 04

   #### Save an orbit record

   Pause and save the debris. Use the method guide to rebuild a return histogram and compare it with the frozen reference products.

   **What to observe:** The download retains the model inputs, particle states, weights and plotted curves. The offline tutorial separately identifies hydrodynamic simulations and observed light.

Physical conclusion

A disruption spreads a star across orbital energies. The return schedule gives one clock; energy dissipation and photon escape add others.

## Related experiments and articles

Follow stellar debris back to a black hole · Reading path

### Follow stellar debris back to a black hole

Articles on this path that use this experiment, followed by the other experiments they suggest.

1. [Article **Why a shredded star can take weeks to brighten**](https://sandboxphysics.com/stories/tidal-disruption-fallback/why-a-shredded-star-brightens-late/)
2. [Article **Give the debris its orbital energies**](https://sandboxphysics.com/stories/tidal-disruption-fallback/tides-and-frozen-orbital-energy/)
3. [Lab **Tidal Deformation, Locking & Breakup** First watch a deformable moon](https://sandboxphysics.com/labs/tidal-field/)
4. [Article **Turn orbital energies into a return-rate curve**](https://sandboxphysics.com/stories/tidal-disruption-fallback/orbital-periods-and-fallback/)
5. [Article **Let returning gas become escaping light**](https://sandboxphysics.com/stories/tidal-disruption-fallback/diffusion-and-observed-light/)
6. [Lab **Black Hole Light Lab** Follow light from a supplied disk](https://sandboxphysics.com/labs/black-hole-light/)
7. [Article **Replay debris orbits beside a real X-ray light curve**](https://sandboxphysics.com/stories/tidal-disruption-fallback/replaying-debris-and-a-light-curve/)
8. [Article **Read the evidence for colliding tidal streams**](https://sandboxphysics.com/stories/tidal-disruption-fallback/reading-stream-collisions-and-polarization/)

Motion & dynamics · Starter path

## From a falling ball to an orbit

Start by measuring gravity and splitting motion into components. Then add contact forces and collisions, and follow the same laws all the way to an orbit.

[Start here → **Free Fall & Measuring Gravity** Capture a few drops and fit the camera positions to estimate gravitational acceleration. Then add air damping and watch the fit drift from the truth. Observe · 14 min](https://sandboxphysics.com/labs/free-fall/)

1. [1 Free Fall & Measuring Gravity](https://sandboxphysics.com/labs/free-fall/)
2. [2 Projectile Flight Designer](https://sandboxphysics.com/labs/projectile-flight/)
3. [3 Inclined Plane & Friction](https://sandboxphysics.com/labs/inclined-plane/)
4. [4 One-Dimensional Collision Bench](https://sandboxphysics.com/labs/collision-bench/)
5. [5 Mass–Spring Oscillator](https://sandboxphysics.com/labs/mass-spring/)
6. [6 How Orbits Take Shape](https://sandboxphysics.com/labs/orbit/)

[View the full path →](https://sandboxphysics.com/topics/mechanics/#starter-path)
