---
title: "NIF laser energy and capsule compression Interactive Lab | Sandbox Physics"
description: "How does a laser pulse compress a shell, and what do the energy comparisons measure?"
canonical_url: "https://sandboxphysics.com/labs/nif-inertial-fusion/"
language: "en"
page_type: "lab"
alternate_languages:
  zh-CN: "https://sandboxphysics.com/zh/labs/nif-inertial-fusion/"
last_modified: "2026-11-15"
---

# NIF laser energy and capsule compression

**How does a laser pulse compress a shell, and what do the energy comparisons measure?** Amplification, frequency conversion and delivery bring laser energy to a target. Ablated material moves outward, pushing the remaining shell inward. Incident laser energy, released nuclear energy and facility electricity are distinct quantities. A nuclear gain compares energies from the same event; exceeding one does not establish electricity generation.

Measure a laser energy chain, inspect finite exposures of a nonreactive shell, and distinguish target gain from facility electricity.

> Interactive simulation: open this page in a web browser to change the parameters and run the model.

Set a teaching pulse

Seed pulse energy factor $1$ Main pulse delay $0\,\mathrm{ns}$ Conversion phase mismatch $0\,\mathrm{m}^{-1}$ Quad energy imbalance $0$ Imaging gate offset $0\,\mathrm{ns}$

These inputs describe the bounded nonreactive model. Gold handles adjust the same inputs.

Independent nuclear reference

Comparison mode

The reference has its own acquisition and calibration. It does not come from the shell trajectory.

Model assumptions

A teaching instrument with synthetic detectors and independent calibration. Its laser chain drives a prescribed nonreactive shell, without DT burn, ignition or electricity generation. Finite exposures support projected quantities. The separate nuclear reference uses its own event’s optical and electrical inputs. Model trajectories are saved separately from measured records.

Current inputs: forward model reference

These curves use the current inputs. They are separate from the selected acquired record and never enter its inverse calculation.

The current reference includes the declared paid monitor ports. The amplifier diagram is an energy-stage schematic. Repeated main and power visits draw from their respective shared reservoirs; no building geometry is implied.

1. Preamplifiers
2. Power: first visit
3. Main: four visits, one reservoir
4. Power: final visit, same reservoir
5. SHG and sum-frequency conversion

IR at SHG input UV at final exit UV at hohlraum

Power is source bin energy divided by its duration. The horizontal origin is the infrared first edge at the SHG receiving face; the other curves keep their actual optical delays.

Each line is one supplied angular sector at stored model times. Gas pressure and paid ablation drive the nonreactive shell. Absorbed drive uses a given axisymmetric coupling; hohlraum radiation transport, fusion reactions and nuclear yield are not calculated.

Target/window dimensions and the final optical paths are explicit teaching geometry. The 48 source mounting directions represent quads ×4; individual as-built beam coordinates are unavailable. Gold handles are numerical input overlays. Crystal phase mismatch has no inferred angle law.

Inspect quad mounting

The opaque hohlraum has real teaching side windows and axial openings. Camera movement grants no extra ray passage. The delivery facets, wavelength splitter and external photodiode pickup route are equivalent teaching hardware, not an as-built optical survey. Backlighting is separately supplied; a finite image does not identify arbitrary angular structure.

| Current model stage | Energy | First edge after seed origin |
| --- | --- | --- |

[Read how laser drive, compression and energy gain connect](https://sandboxphysics.com/stories/instruments/nif-inertial-fusion/)

## Locate each energy in the pulse chain

**Background** NIF sends shaped nanosecond pulses into a hohlraum. X rays drive material off the capsule, and recoil pushes the remaining shell inward. The model here follows a nonreactive shell and gas in 16 angular sectors, with prescribed absorption and ablation fractions.

**Why it matters** Optical energy, capsule images and electrical input come from different measurements. Locate each signal in space and time before interpreting an energy ratio.

- **Focus question**: Where does the pulse energy go, and what compression information survives a finite exposure?
- **One-sentence intuition**: Keep finite detector readings separate from model trajectories. Each energy comparison uses the appropriate planes of one event.

### Core mathematical model

#### Energy through a conversion segment

$$
E_{\mathrm{IR,in}}=E_{\mathrm{UV}}+E_{1\omega,\mathrm{res}}+E_{2\omega,\mathrm{res}}+E_{\mathrm{other}}
$$

This balance covers a complete pulse through the same conversion segment. Unobserved output also includes sampling ports and component losses. Match the measurement planes; their difference does not by itself identify capsule absorption.

#### Energy inside the observed receiving gate

$$
E_{q,\mathrm{gate}}=\sum_{k\in\mathrm{gate}}e_{qk}^{\mathrm{filtered}}
$$

q labels a quad and k a receiving bin. Each calibrated bin contains detector-filtered energy. The sum covers only the observed gate; it restores no missing tail and does not align different channel delays to a target pulse.

#### Three ratios of one independent reference event

$$
\begin{aligned}G_{\mathrm{target,ref}}&=\frac{\overline E_{\mathrm{nuc,ref}}}{E_{\mathrm{UV,ref}}}\\G_{\mathrm{wall,th,ref}}&=\frac{\overline E_{\mathrm{nuc,ref}}}{E_{\mathrm{grid,ref}}}\\\eta_{\mathrm{laser,ref}}&=\frac{E_{\mathrm{UV,ref}}}{E_{\mathrm{grid,ref}}}\end{aligned}
$$

The nuclear term is an expectation inferred by independent diagnostics and the given reaction-energy conversion. UV and wall electrical input belong to that same reference event. The ratios describe target gain, nuclear heat relative to electrical input, and laser conversion. The thermal ratio is not net electrical gain; fusion gain of the nonreactive mechanical shot stays undefined.

### Common difficulties

#### Does frequency tripling triple optical energy?

**Typical misconception** A more energetic ultraviolet photon means three times as much total light energy.

**Better mental model** Several lower-frequency photons contribute to one UV photon. Total energy also includes residual light and optical losses.

#### Does a smaller image determine fusion yield?

**Typical misconception** The image RMS width is an instantaneous shell radius, and a small enough radius determines ignition and fusion energy.

**Better mental model** Exposure duration, projection direction, finite pixels and detector blur affect image width. It is not an instantaneous shell radius. This gas has no nuclear-reaction or self-heating law; the nuclear-energy reference is an independent diagnostic exercise.

### Run the experiment

1. 01

   #### Follow the shared gain medium

   Choose Nonreactive drive and open Current inputs: forward model reference. Follow the power and main amplifier visits.

   **What to observe:** The pulse passes the power amplifier, the same main medium four times, and the power amplifier again. Later light draws on the energy remaining in each medium.

2. 02

   #### Compare the received time distributions

   Choose Later main pulse and inspect the photodetector curves and stage energies.

   **What to observe:** Each of 48 channels has 256 ADC receiving bins. Its curve describes filtered energy within that gate, shaped by detector response, optical travel and electronic delays. A single peak does not specify total pulse energy.

3. 03

   #### Keep the residual wavelengths visible

   Choose Phase mismatch and inspect UV and both residual paths in the conversion view.

   **What to observe:** Conversion redistributes optical energy among wavelengths. Compare all paths; the gold mismatch input does not supply a calibrated crystal-angle law.

4. 04

   #### Separate model curves from image readouts

   Compare No optical drive and Uneven quad input. Inspect the model’s sector curves, then attenuation, centroid and RMS width in both image views.

   **What to observe:** Prepared gas can still move the shell with the light off. Sector radii belong to the model, whose complete local trajectory can be exported separately. Images give signed projections over a whole exposure. Supported pixel-space quantities may survive a failed metre-scale calibration.

5. 05

   #### Use the reference event’s own denominators

   Choose Independent nuclear reference. Inspect that event’s incident UV and electrical input, then compare its three energy ratios.

   **What to observe:** The default independent exercise uses nominal scales of 2 megajoules of UV and 500 megajoules of electrical input. All three ratios use its own observations. The dated 2022 NIF energy pair is a separate published result.

Physical conclusion

Calibrated optical signals describe delivery, and a supplied model demonstrates compression. The nuclear-reference ratios use that separate event’s own energies and electrical input.

## Related experiments and articles

How physics instruments measure · Reading path

### How physics instruments measure

Articles on this path that use this experiment, followed by the other experiments they suggest.

1. [Article **How NIF turns a laser pulse into an implosion**](https://sandboxphysics.com/stories/instruments/nif-inertial-fusion/)

Fields & matter · Starter path

## From a field to an electron microscope

Map an electric field and steer a charged particle. Then find the electron's wavelength and use electron beams to see a crystal and a surface.

[Start here → **Make an Electric Field Visible** Move the probe around a dipole and check that the field always points downhill on the potential landscape. Observe · 8 min](https://sandboxphysics.com/labs/electric-field/)

1. [1 Make an Electric Field Visible](https://sandboxphysics.com/labs/electric-field/)
2. [2 A Charge Bending through Fields](https://sandboxphysics.com/labs/charged-particle/)
3. [3 Electron Wavelength & Voltage](https://sandboxphysics.com/labs/electron-wavelength/)
4. [4 Electron Diffraction & Reciprocal Space](https://sandboxphysics.com/labs/electron-diffraction/)
5. [5 TEM Bright Field, Dark Field & SAED](https://sandboxphysics.com/labs/tem-mode-selector/)
6. [6 SEM Secondary-Electron Topography](https://sandboxphysics.com/labs/sem-topography/)

[View the full path →](https://sandboxphysics.com/topics/fields-and-matter/#starter-path)
