---
title: "Fast Radio Burst Dispersion and the Cosmic Baryon Census Interactive Lab | Sandbox Physics"
description: "How can the delay of a radio burst count the ordinary matter between galaxies?"
canonical_url: "https://sandboxphysics.com/labs/frb-baryon-census/"
language: "en"
page_type: "lab"
alternate_languages:
  zh-CN: "https://sandboxphysics.com/zh/labs/frb-baryon-census/"
last_modified: "2026-11-17"
---

# Fast Radio Burst Dispersion and the Cosmic Baryon Census

**How can the delay of a radio burst count the ordinary matter between galaxies?** Free electrons delay the low frequencies of a radio burst more than the high ones, so the sweep counts the electrons along the path. Bursts from galaxies with known redshifts gain electrons with distance at the rate expected if the ordinary matter missing from galaxies is thin ionised gas between them. Each sightline crosses different halos, so one burst’s delay is not a precise distance.

Drag a sightline through halos and intergalactic gas, watch a radio pulse disperse, and compare simulated dispersion with real localized bursts.

> Interactive simulation: open this page in a web browser to change the parameters and run the model.

Model assumptions

The mean relation is equation 2 of Macquart and colleagues (2020) for a flat universe with the Planck 2015 parameters they list, fully ionised hydrogen and helium with a helium mass fraction of one quarter, and a constant diffuse fraction; the paper lets that fraction change slowly with redshift. The clumpy universe is a teaching model, not a cosmological simulation. Halos come in four fixed classes, from dwarf galaxies to clusters, with constant comoving abundance. Each keeps three quarters of its share of baryons inside the radius where its density is two hundred times the critical density, spread with the modified NFW profile of Prochaska and Zheng (2019). Halos below the feedback mass hand their gas to the intergalactic medium over one decade of mass. The intergalactic gas varies from one 8 megaparsec cell to the next by a log-normal factor of width 0.6. Halo masses, abundances, cell size and that width are schematic choices; they give a spread parameter of 0.09 to 0.2, inside the range of the semi-analytic values Macquart and colleagues quote but lower than their 0.32 for the smallest feedback mass. Each simulated burst adds a host term drawn log-normally with width 0.5 and divided by one plus redshift. The Milky Way terms are fixed at 30 and 50 parsecs per cubic centimetre as in the paper. The real points are the six localized ASKAP bursts of the paper’s table 1, with the Milky Way terms removed; the open diamond is FRB 190611, left out of the paper’s gold sample. The stage stretches the up–down direction so halos are visible, shows one fixed random realisation and slows the pulse to seconds.

> Interactive charts computed in the browser from the Lab settings.

## A radio pulse counts the electrons it passes

**Background** Stars, cold gas and the hot gas seen in X-rays add up to only part of the ordinary matter that the early universe implies. The rest was long suspected to be thin ionised gas around and between galaxies, too faint to see directly.

**Why it matters** A fast radio burst crosses all of that gas. Free electrons slow low frequencies more than high ones, and the size of that sweep, the dispersion measure, is the number of electrons per unit area along the path. Once the host galaxy’s redshift is known, the bursts become a census.

- **Focus question**: Why do bursts at the same redshift show different dispersion, and why does that not spoil the census?
- **One-sentence intuition**: The average dispersion at each redshift fixes how much ionised gas there is; the scatter around it records how clumpy that gas is.

### Core mathematical model

#### The delay grows as the inverse square of frequency

$$
\Delta t\simeq 4.15\,\mathrm{ms}\left(\frac{\mathrm{DM}}{\mathrm{pc\,cm^{-3}}}\right)\left[\left(\frac{\nu_{\mathrm{lo}}}{\mathrm{GHz}}\right)^{-2}-\left(\frac{\nu_{\mathrm{hi}}}{\mathrm{GHz}}\right)^{-2}\right],\qquad \mathrm{DM}=\int n_e\,\mathrm{d}l
$$

The pulse’s colours on the stage separate by an amount set by the dispersion collected so far. Real delays are seconds across a radio band; the stage only shows the order: low frequencies arrive last.

#### The mean relation

$$
\langle\mathrm{DM}_{\mathrm{cosmic}}\rangle(z)=\int_0^{z}\frac{c\,\bar n_e(z')}{H_0(1+z')^2E(z')}\,\mathrm{d}z',\qquad \bar n_e=\frac{f_{\mathrm d}\,\rho_b(z)}{m_p}\left(1-\frac{Y}{2}\right)
$$

Here $\rho_b\propto(1+z)^3$ is the cosmic baryon density, $Y=0.25$ the helium mass fraction and $f_{\mathrm d}$ the share of baryons in diffuse ionised gas. It is equation 2 of Macquart et al. (2020); the dashed curves in every chart are this formula.

#### What a telescope measures

$$
\mathrm{DM}_{\mathrm{FRB}}=\mathrm{DM}_{\mathrm{MW,ISM}}+\mathrm{DM}_{\mathrm{MW,halo}}+\mathrm{DM}_{\mathrm{cosmic}}+\frac{\mathrm{DM}_{\mathrm{host}}}{1+z}
$$

The host term is divided by $1+z$ because the burst’s frequencies were higher when it crossed its own galaxy, and the delay scales as $\nu^{-2}$. The Milky Way terms are fixed at 30 and 50 in the Lab, as in the paper.

#### The scatter shrinks slowly with distance

$$
\Delta=\frac{\mathrm{DM}_{\mathrm{cosmic}}}{\langle\mathrm{DM}_{\mathrm{cosmic}}\rangle},\qquad \sigma_{\Delta}\approx F\,z^{-1/2}
$$

A longer path averages over more independent structures, so the relative spread falls roughly as one over the square root of redshift. $F$ grows when more gas stays in halos, which is why feedback can be read from the scatter.

### Common difficulties

#### Dispersion is not a distance

**Typical misconception** A larger dispersion measure always means a farther burst.

**Better mental model** The host galaxy and any halo on the path add electrons that have nothing to do with distance. In the paper’s sample, FRB 190608 at redshift 0.118 carries as much dispersion as the mean relation gives at about 0.3, because its host contributes a lot. The redshift readout shows the error you make by ignoring this.

#### One burst cannot weigh the universe

**Typical misconception** If a burst sits above the mean curve, the universe must have more baryons.

**Better mental model** A single sightline can cross a cluster and sit far above the mean, or thread voids and sit below it. Only the average over many bursts, fitted together with the scatter and the host term, constrains the baryon density; that is why Macquart et al. fit all bursts jointly.

### Run the experiment

1. 01

   #### Watch one pulse

   Leave the default running and follow the pulse from the host to the Milky Way while watching the middle chart.

   **What to observe:** The teal area climbs steadily through the intergalactic gas; each gas-filled halo the pulse crosses adds an orange step. The pulse’s low-frequency end falls further behind.

2. 02

   #### Steer the sightline

   Drag the host up and down, then try Straight through a cluster and Threading the voids.

   **What to observe:** The same redshift gives about 0.8 to 1.6 times the average. The gold line in the histogram jumps across the spread of all simulated sightlines.

3. 03

   #### Change the baryon budget

   Choose Half the baryons missing and compare the dashed curve with the pink ASKAP points; then choose Feedback empties the halos.

   **What to observe:** With half the diffuse gas, the mean falls well below the real bursts. Emptying halos keeps the mean but narrows the band, because the gas spreads more evenly.

Physical conclusion

Localized bursts trace a mean relation that needs most of the cosmic baryons in diffuse ionised gas; the scatter around it is a second measurement, of where that gas sits.

## Sources and model scope

The mean relation, the Milky Way terms, the real bursts and the scatter form follow Macquart et al. (2020), equation 2, table 1 and methods. The halo gas profile and cluster abundance follow Prochaska and Zheng (2019), sections 2 and 6. The larger DSA-110 census of Connor et al., 69 localized bursts in its arXiv version 2, is discussed in the reading guide. An independent Python script recomputes the mean, the scatter and the published fit and saves its inputs, outputs and failure cases.

- [Macquart et al. (2020), A census of baryons in the Universe from localized fast radio bursts, Nature 581, 391, arXiv:2005.13161v1](https://arxiv.org/abs/2005.13161v1)
- [Prochaska and Zheng (2019), Probing Galactic halos with fast radio bursts, MNRAS 485, 648, arXiv:1901.11051v1](https://arxiv.org/abs/1901.11051v1)
- [Connor et al., A gas-rich cosmic web revealed by the partitioning of the missing baryons, arXiv:2409.16952v2](https://arxiv.org/abs/2409.16952v2)

[Study the FRB baryon-census course: from one delayed pulse to the missing matter](https://sandboxphysics.com/stories/frb-baryon-census/)

## Related experiments and articles

Fast radio bursts and the cosmic baryon census · Reading path

### From one delayed pulse to the missing baryons

Articles on this path that use this experiment, followed by the other experiments they suggest.

1. [Article **How do fast radio bursts count the ordinary matter between galaxies?**](https://sandboxphysics.com/stories/frb-baryon-census/late-radio-waves-count-hidden-electrons/)
2. [Article **How free electrons delay a radio burst**](https://sandboxphysics.com/stories/frb-baryon-census/how-plasma-delays-a-radio-burst/)
3. [Article **Adding up electrons across an expanding universe**](https://sandboxphysics.com/stories/frb-baryon-census/adding-up-electrons-across-the-universe/)
4. [Article **Why every sightline gives a different dispersion**](https://sandboxphysics.com/stories/frb-baryon-census/why-every-sightline-differs/)
5. [Article **Recompute the localized-burst baryon census**](https://sandboxphysics.com/stories/frb-baryon-census/recompute-the-localized-frb-census/)
6. [Article **Reading the FRB baryon census papers**](https://sandboxphysics.com/stories/frb-baryon-census/reading-the-frb-baryon-census/)

Fields & matter · Starter path

## From a field to an electron microscope

Map an electric field and steer a charged particle. Then find the electron's wavelength and use electron beams to see a crystal and a surface.

[Start here → **Make an Electric Field Visible** Move the probe around a dipole and check that the field always points downhill on the potential landscape. Observe · 8 min](https://sandboxphysics.com/labs/electric-field/)

1. [1 Make an Electric Field Visible](https://sandboxphysics.com/labs/electric-field/)
2. [2 A Charge Bending through Fields](https://sandboxphysics.com/labs/charged-particle/)
3. [3 Electron Wavelength & Voltage](https://sandboxphysics.com/labs/electron-wavelength/)
4. [4 Electron Diffraction & Reciprocal Space](https://sandboxphysics.com/labs/electron-diffraction/)
5. [5 TEM Bright Field, Dark Field & SAED](https://sandboxphysics.com/labs/tem-mode-selector/)
6. [6 SEM Secondary-Electron Topography](https://sandboxphysics.com/labs/sem-topography/)

[View the full path →](https://sandboxphysics.com/topics/fields-and-matter/#starter-path)
