---
title: "AGN Reverberation Mapping Interactive Lab | Sandbox Physics"
description: "How does a light echo measure gas around a black hole? Gas re-emits a change in the central light after that light reaches it."
canonical_url: "https://sandboxphysics.com/labs/agn-reverberation/"
language: "en"
page_type: "lab"
alternate_languages:
  zh-CN: "https://sandboxphysics.com/zh/labs/agn-reverberation/"
last_modified: "2026-11-15"
---

# AGN Reverberation Mapping

**How does a light echo measure gas around a black hole?** Gas re-emits a change in the central light after that light reaches it. The extra travel time reveals the gas distribution; the line width adds its motion. Connecting those measurements to a black-hole mass also requires the gas geometry and dynamics.

Drag the broad-line disk to change its tilt. Follow one gas distribution from its delayed glow to a velocity–delay map and an echoed light curve.

> Interactive simulation: open this page in a web browser to change the parameters and run the model.

Model assumptions

The central continuum and every gas response are simulated. A thin, axisymmetric cloud distribution has instantaneous, isotropic, linear line response, with equal response per radial interval. Clouds have circular Keplerian velocities and an optional prescribed radial component; these positions are frozen during the short light-echo window. Positive line-of-sight velocity means recession. The extra path is the cloud radius minus its displacement toward the distant observer. The model clock is the arrival time after subtracting the common source-to-observer travel time, with no cosmological redshift. Scene glow shows the light received at that time. Quadrature samples represent weighted response, not individually resolved gas clouds. Cloud sizes, the central source, the tilt handle and velocity arrows are enlarged; arrows share a fixed scale. A fixed nonlinear display scale makes small continuum variations visible. There is no photoionization calculation, obscuration, relativity or unique mass inference from a correlation peak. The separate tutorial analyzes an actual monitoring record.

Approaching gas Receding gas Bright glow: current echo Arrow: toward the observer

Model arrival time $t=32\,\mathrm d$ Scrub model arrival time

The source and all curves are simulated. The same cloud weights produce the map and the line light curve; a correlation peak need not equal the average delay.

Velocity reveals which gas answers first

$v_{\rm los}\ [\mathrm{km\,s^{-1}}]$ $\tau\ [\mathrm d]$

Brighter cells carry more response; blue gas approaches and red gas recedes. The gold line marks elapsed delay since the first continuum peak.

A sharp flash returns as a broader echo

Central continuum Line echo

$t\ [\mathrm d]$ $F/\langle F_{\rm base}\rangle$

Response distribution, correlation and mass

How the light is spread in delay

$\tau\ [\mathrm d]$ $\sum_v\Psi_{v,\tau}$

Cross-correlation of these two curves

$\tau\ [\mathrm d]$ $r(\tau)$

$$
\mathrm{VP}=\frac{c\langle\tau\rangle\sigma_v^2}{G},\qquad M=f\,\mathrm{VP}
$$

The virial product combines the response-weighted delay with the simulated line dispersion. A geometric and dynamical factor is still needed for a mass. A face-on circular disk has no projected line width in this idealization.

## The extra path turns a flash into a ruler

**Background** The central source brightens before the surrounding gas responds. Light travels from the source to the gas, and then from the gas to us. Subtract the direct route and the remaining travel time measures a geometric path difference.

**Why it matters** Even when a telescope cannot resolve the broad-line region, a monitoring campaign can measure when its line emission changes. The delay and the Doppler width then supply different pieces of information about the gas.

- **Focus question**: Do all parts of a ring at one radius respond at the same arrival time?
- **One-sentence intuition**: Only a face-on ideal ring has one delay. Tilting the ring makes its near side answer before its far side, even though both lie at the same distance from the source.

### Core mathematical model

#### Extra light-travel distance

$$
\tau=\frac{r-z}{c},\qquad \boldsymbol n=\boldsymbol e_z
$$

The coordinate toward the distant observer shortens the final path. The common source-to-observer path is subtracted. These model arrival times assume zero cosmological redshift.

#### The delay range of a thin ring

$$
\frac{R}{c}(1-\sin i)\leq\tau\leq\frac{R}{c}(1+\sin i)
$$

Inclination is measured from the disk normal. The mean delay stays at the radius divided by light speed for an axisymmetric ring, while the range widens as the disk tilts.

#### One distribution creates an entire light curve

$$
\begin{gathered}L(t)=\int_0^\infty\Psi(\tau)C(t-\tau)\,\mathrm d\tau\\[0.5em]\int_0^\infty\Psi(\tau)\,\mathrm d\tau=1\end{gathered}
$$

Each gas sample echoes an earlier part of the same continuum. Adding its weighted contribution broadens the flash. The line responds linearly and instantaneously in this model.

#### A line width and a delay give a virial product

$$
\mathrm{VP}=\frac{c\langle\tau\rangle\sigma_v^2}{G},\qquad M=f\,\mathrm{VP}
$$

The velocity dispersion is measured along the sightline. Converting this product to mass needs a factor that depends on geometry and dynamics. The correlation peak is separately computed from the two light curves.

### Common difficulties

#### The source-to-gas distance is only part of the route

**Typical misconception** Every gas cloud at the same radius has the same observed delay.

**Better mental model** The onward path to us also matters. Near-side and far-side photons travel different total distances.

#### A correlation peak is not a complete geometric map

**Typical misconception** The correlation peak gives one exact gas radius and a unique black-hole mass.

**Better mental model** The peak depends on the response distribution and on the driving continuum. Projected velocity also depends on inclination and any radial motion.

### Run the experiment

1. 01

   #### Watch the first echo

   Leave the default disk playing. Compare the bright arc with the moving cursor on the two light curves.

   **What to observe:** Different parts of the same distribution respond at different times. The total line curve is broader than the driving flash.

2. 02

   #### Tilt the disk

   Drag the gold handle, then compare the face-on ring with the strongly tilted preset.

   **What to observe:** A face-on ring has one delay and zero line-of-sight circular velocity. Tilting opens both the delay spread and the Doppler width.

3. 03

   #### Add inward motion

   Choose the inward-motion preset and inspect the velocity–delay map. Compare it with circular motion at the same orientation.

   **What to observe:** The near side and far side acquire different radial-velocity signs. Which side of the line responds early now changes in a recognizable way.

4. 04

   #### Save the response

   Pause and save the response. The download contains the same weighted gas samples, transfer bins and light curves shown here.

   **What to observe:** The accompanying method guide separately uses an actual monitoring record, where sampling and measurement errors enter the lag estimate.

Physical conclusion

A light echo measures an extra path. Its full distribution connects gas geometry to a delayed spectrum; turning that information into a mass also requires a dynamical model.

## Related experiments and articles

Measure a black hole with light echoes · Reading path

### Measure a black hole with light echoes

Articles on this path that use this experiment, followed by the other experiments they suggest.

1. [Article **How a black hole can be measured with an echo**](https://sandboxphysics.com/stories/agn-reverberation/why-gas-echoes-around-black-holes/)
2. [Article **Find the extra distance travelled by an echo**](https://sandboxphysics.com/stories/agn-reverberation/light-travel-time-and-delay-surfaces/)
3. [Article **Turn an orbiting ring into a velocity–delay map**](https://sandboxphysics.com/stories/agn-reverberation/velocity-delay-maps-and-keplerian-motion/)
4. [Article **Measure a lag before turning it into a mass**](https://sandboxphysics.com/stories/agn-reverberation/measuring-lags-and-virial-products/)
5. [Article **Recompute an observed echo in NGC 5548**](https://sandboxphysics.com/stories/agn-reverberation/recomputing-an-observed-reverberation-lag/)
6. [Article **Read a velocity–delay map as an inference from changing spectra**](https://sandboxphysics.com/stories/agn-reverberation/reading-velocity-resolved-reverberation/)

Waves & optics · Starter path

## From one ray to interference measurement

Start with refraction, find where the ray picture stops working, then use interference to measure tiny distances.

[Start here → **Optical Boundary Explorer** Turn the incident angle and watch reflected and transmitted power trade off. Then switch to the critical-angle scene. Observe · 11 min](https://sandboxphysics.com/labs/optical-boundary-explorer/)

1. [1 Optical Boundary Explorer](https://sandboxphysics.com/labs/optical-boundary-explorer/)
2. [2 Rainbow Caustic Observatory](https://sandboxphysics.com/labs/rainbow-laboratory/)
3. [3 Camera Obscura](https://sandboxphysics.com/labs/camera-obscura/)
4. [4 Coherent Wave Composer](https://sandboxphysics.com/labs/coherent-wave-composer/)
5. [5 Young Double-Slit Bench](https://sandboxphysics.com/labs/young-double-slit-bench/)
6. [6 Michelson Precision Lab](https://sandboxphysics.com/labs/michelson-precision-lab/)

[View the full path →](https://sandboxphysics.com/topics/waves-and-optics/#starter-path)
